ProductdetailsFeature:1.Itisanewenergysavingreplacementfor4foot'T8'fluorescenttubes.2.Itisanideallightingsolutionforareassuchascarparkinglot,corridorsandstorageareas.3.Fullbrightnesswhenmoveme...
Send InquiryFeature:
1.It is a new energy saving replacement for 4 foot 'T8' fluorescent tubes.
2.It is an ideal lighting solution for areas such as car parking lot , corridors and storage areas.
3.Full brightness when movement detected dropping to 20% brightness in standby mode (no movement).
4.In-built microwave motion sensor.
5.Much more effective than previous PIR sensors.
6.Easy to install, Allmay LED tube fits into your exsiting fluorescent T8 light fixture.
1. When a moving object is detected the light will be swiched on to 100% brightness.
2. After a propagation time of 5sec, 30sec, 1min, 5min, 10min, 20min 30min or 60min the T8 LED tube will dim to 0%, 10%, 20%, 30% or 40%.
If the dim level is set to 0% the tube will be switched off after a pre-defined time delay that can be adjusted from 5sec to 1 hours.
Alternatively, the tube light can dim to 10%, 20%, 30% or 40% for infinite time until the next movement is detected. For example the T8 sensor tube at 18watt power is set to : 1min, 30% that means:
The tube will be fully, 18watt and 1800lumen output. After 1 min the tube light will be reduced to 750 lumenes (30%) and will stay on continuously. The light will consumer approximately 5.4Watt only.